Kh-31
kit no. R 72 008

Review by Al Magnus - one72guy(at)gmail(dot)com
   
This is a detail set of the Kh-31 (X-31) Russian high-speed anti-radiation missile. It contains one missile cast in a light yellow resin. There are no decals provided.

The detail is excellent. Work to finish this missile is minimal. There is a mold block to remove with a razor saw, and some very thin flash needs to be trimmed from the rear portion of the missile. There is a mold seam that must be taken care of. It is not to large but big enough that it can't be ignored. My copy had a shallow crevasse running the entire length of the seam between one of the boosters and the missile body that needed filling and sanding. The exhaust end of the missile is slightly out of round. There were a couple of holes that needed filling on the rear portion of the missile. The overall finish has a slight roughness to it that requires a light sanding before painting.

Be careful when working around the rear fins. They are petite and are easy to snap off.

Four colour options are provided. I chose option 3, the overall red scheme. I modified the scheme slightly to match a picture found on the web (see above, right most), that showed some small checkerboard markings on the nose and tail. These I scrounged from my decal spares box.


Conclusion

Overall a nice rendition, though it sure looks suspiciously like the Kh-31 released by ICM in their Soviet Modern Air Armament kit.

Review Last Updated: 01 September 2019

© AC Magnus 2006